FABRITECH DODGE   

DODGE STAGE II TRACTION BARS
Part Number	Description
FT-200D1	83-93 1/2 ton
FT-200D1-1	Same as above in 5 foot
FT-200D1Z	80-93 1/2 ton short bed
FT-200D1Z-1	Same as above in 5 foot
FT-200D2	80-93 3/4 and 1 ton
FT-200D2-1	Same as above in 5 foot
FT-200D3	94-01 1/2 ton
FT-200D3-1	Same as above in 5 foot
FT-200D3Z	94-01 1/2 ton short bed standard cab
FT-200D3Z-1	Same as above in 5 foot
FT-200D4	94-01 3/4 and 1 ton
FT-200D4-1	Same as above in 5 foot
FT-200D5	With Dana 80 Rear
FT-200D5-1	Same as above in 5 foot

Notes:

1	Must remove bump stop pads for bars to fit
2	Will not fit with rear sway bar
3	Rear blocks with bump stop ears will need to be swapped from side to side for clearance. We do not recommend rotating blocks because of pinion angle.
4	Requires at least six inches of suspension lift to allow for adequate ground clearance.  Note applies to short bed applications.